Winterley Lever Frames |
|
 |
|
A method of un-coupling vehicles anywhere on the layout WITHOUT the use of track magnets or ramps. A range of 7mm etched brass windows for the 0 gauge modeller.
|
If you require more information or wish to order items, please write to: John Shaw 31 Popes Court Popes Lane Totton SOUTHAMPTON SO40 3GF
You may email me at: john@winterleyproducts.co.uk |
 |
|||
The photographs show a 20 lever frame built for the Winchester Railway Modellers Club to operate part of their layout Abbotstone.
Up to five controllers have access to this part of the layout, but there are no section switches, no cab-control switches and no isolating switches, just signal and point levers that are mechanically interlocked to prevent unauthorised or conflicting moves.
Pulling the correct route and signal chooses the correct controller to drive the train.
It is also possible to remove the direction switch from the controller as the signal will select the correct direction. This is over-ridden in the goods yard where shunting takes place. |
|||||
|
|
|
|
|
|